Roland VS-2400CD - Page 451

Supplemental Information
Roland VS-2400CD Owner’s Manual www.RolandUS.com 451
FLEX BUS Area
EQ Area
VE-7000 knob or button: Same as CH EDIT parameter or F button:
10. 1-8 Knobs Corresponding AUX Send Levels 1-8
11. 1-8 ON/OFF Corresponding AUX Send Status
12. EDIT (Set ALL to 0dB) Displays CH EDIT VIEW screen, Aux send selected
Hold SHIFT and press 1-8 ON/OFF to set the corresponding Send Level to 0 dB. Hold
SHIFT and press Set ALL to 0dB (EDIT) to set all Aux Send Levels to 0 dB.
VE-7000 knob or button: Same as CH EDIT parameter or F button:
13. HI/HI-MID/LO-MID/LO
GAIN
Corresponding EQ band gain
14. HI/HI-MID/LO-MID/LO
FREQ.
Corresponding EQ band frequency
15. HI-MID/LO-MID Q Hi-mid and lo-mid EQ band Q
16. EQ ON/OFF EQ on or off
17. EDIT (RESET) Displays EQ screen
Hold down SHIFT as you turn an EQ HI/HI-MID/LO-MID/LO FREQ knob to change
values by larger increments.
Hold down SHIFT and press RESET (EDIT) to reset the EQ to its default values.
10
11
12
13 14 15
16 17
VS2400OMUS.book 451 ページ ２００６年２月２８日 火曜日 午前１１時１２分