Roland VS-2480 - Page 51

51
Using Effects
Using Effects
fig.04-01_50
3. Press [PAGE] several
times until function tab
“Page1” will display at the
front.
4. Press [F1 (FX 1)]. The
effect algorithm used by
effect 1 (FX 1) will be
displayed.
fig.fx-patch
5. Press [F1 (PATCH)]. PATCH
SELECT will appear.
fig.fx-patch
6. Press [F1 (PRESET)]. You will be
able to select patches from the
preset bank.
7. Use TIME/VALUE dial to select a
effect patch that you wish to use.
For this example, select an effect
such as “P036 :[RV:LargeHall].”
8. Press [F5 (SELECT)]. The effect
patch used for effect 1 (FX 1) will be finalized, and you will return to the
screen that displays the effect algorithm. If you wish to cancel to select the
patch, press [F6 (EXIT)]. In this case, you will return to the screen that
displays the effect algorithm, without selecting a patch.
9. Press [F6 (EXIT)].
10. Press [HOME (DISPLAY)]. Home Condition screen will appear.
SHUTTLE
ROUTING
EZ
MENU
TRACK EDIT
EXT SYNC
TO THRU
FROM
PREVIEW
COPY MOVE INSERT CUT ERASE COMP / EXP.
IMPORT
LOOPA.PUNCH TOOUTIN FROM WAVE DISP
REDO
UNDO
SHIFT
PROJECT TRACK EFFECT UTILITY
COPY MOVE TRIM IN TRIM OUT DELETE SPLIT NEW
AUTOMIX
ENTER EXIT
REGION
PHRASE
CD
-
RW
MASTERING
AUTOMIX
ZOOM
GRADATION
MIDI DISK /
TIME / VALUE
//
PATCH BAY
+
+
PA GE F1 F2 F3 F4 F5 F6 HOME
DISPLAY
10
4-6
7
8 8,9
32
0
/-
56
1
4
987
LOCATOR
PREVIOUS NEXT
SCENE
BANK AUX 7 AUX 8 USER
AUX 4 AUX 5 AUX 6
AUX 1 AUX 2 AUX 3
BANK
MARKER
LOCATOR / MARKER / SCENE
3