Roland VS-2480 - Parameter List

18
Parameter List
■ Input Mixer [IN 1-16] (or [IN 17-24 AUX MST]) → [CH EDIT] (IN 1–16, 17–24)]
Parameter name Display Value, Initial value
Patchbay - ANALOG INPUT 1–16, R-BUS1 1–8, R-BUS2 1–8, COAXIAL,
OPTICAL (*1)
Channel Link Link Off , On
Attenuator ATT -42.0– 0.0 –+6.0 dB
Phase Phase NRM , INV
Fader Group Group Off , 1–16
Fader Link F.LINK Off , On
Level Meter - Pre, Pst
Solo Solo Off , On
Mute Mute Off , On
Offset Level - - ∞ – 0.0 –+6.0 dB (*2)
Fader Fader - ∞ –+6.0 dB
Mix Send Switch MIX Off, On
Offset Pan PAN L63– C –R63 (*3)
Mix Send Pan PAN L63– 0 –R63
Dynamics Switch DYN Sw Off , On
Dynamics Type DYN Type COMPRESSOR , EXPANDER, EXP+COMP (*4)
Compressor Auto Gain Switch AutoGain Off, On (*5) (*6)
Compressor Key In KeyIn IN1–24 (Initial value is the current channel)(*5)
Compressor Threshold Level Threshold -24.0 –0.0 dB (*5) (*6)
Compressor Ratio Ratio 1.00:1– 2.00:1 – ∞ :1 (*5) (*6)
Compressor Attack Attack 0.0– 10.0 –800.0ms (*5) (*6)
Compressor Release Release 0– 500 –8000 ms (*5) (*6)
Compressor Level Level -24.0– 0.0 –+24.0 dB (*5) (*6) (*7)
Expander Key In KeyIn IN1–24 (Initial value is the current channel)(*8)
Expander Threshold Level Threshold -80.0– -40.0 –0.0 dB (*6) (*8)
Expander Ratio Ratio 1.00:1– 2.00:1 – ∞ :1 (*6) (*8)
Expander Attack Attack 0.0 –800.0ms (*6) (*8)
Expander Release Release 0– 500 –8000 ms (*6) (*8)
Equalizer Switch EQ Sw Off, On
Filter Switch Filter Sw Off, LPF, HPF, BPF, BEF (*9)
Filter Frequency Filter F 20Hz– 2.00 kHz –20.0 kHz (*9) (*10)
Filter Q Filter Q 0.36– 0.71 –16.0 (*9) (*10)
Equalizer Low Gain EQ Low G -15.0– 0.0 –15.0 dB (*9)
Equalizer Low Frequency EQ Low F 20 Hz– 80 Hz –1.0 kHz (*9)
Equalizer Low Mid Gain EQ Lo-Mid G -15.0– 0.0 –15.0 dB (*9)
Equalizer Low Mid Frequency EQ Lo-Mid F 20 Hz– 400 Hz –20.0 dB (*9)
Equalizer Low Mid Q EQ Lo-Mid Q 0.36– 2.00 –16.0 (*9)
Equalizer High Mid Gain EQ Hi-Mid G -15.0– 0.0 –15.0 dB (*9)
Equalizer High Mid Frequency EQ Hi-Mid F 20 Hz– 2.00 kHz –20.0 kHz (*9)
Equalizer High Mid Q EQ Hi-Mid Q 0.36– 2.00 –16.0 (*9)
Equalizer High Gain EQ High G -15.0– 0.0 –15.0 dB (*9)
Equalizer High Frequency EQ High F 1.0 kHz– 10.0 kHz –20.0 kHz (*9)
AUX Send Switch AUX (1–8) Off, Pre/ Pst (*11)
AUX Send Level - - ∞ –+6.0 dB (*12)
AUX Send Pan - L63– C –R63 (*13)
Direct Path Switch DIR (1–8) 1, ..., 8 (INPUT MIXER CH 1), Off, On
Effect Insert Switch FX1–8 Off , Ins, InsL, InsR, InsS (*14)
Effect Insert Send Level Snd - ∞ – 0.0 –+6.0 dB (*15)
Effect Insert Return Level Rtn - ∞ – 0.0 –+6.0 dB (*15)
Surround Pan SURROUND PAN L63– C –R63 (*16)
Surround Depth SURROUND DEPTH F63– C –R63 (*16)
Surround LR:C Rate SURROUND LR:C 0– 50 –100 % (*16) (*17)
Surround Sub Woofer Level SURROUND Sub.W - ∞ – 0.0 –+6.0 dB (*16) (*18)
*1 Patchbay works in pairs. Odd-numbered channel can select an odd-numbered input or Lch, and even-numbered channel can select
an even-numbered input or Rch.
Selectable area of the patchbay varies by the select settings of R-BUS2 COAXIAL and R-BUS2 OPTICAL in the Project parameters.
*2 Valid when Channel Link is “On.”
*3 If Channel Link is On, the “Pan” parameter will change to the offset pan parameter.
*4 When the dynamics type is "EXP+COMP," dynamics on the track mixer cannot be used.
*5 Valid when Dynamics Type is “COMPRESSOR.”
2480v2_app_e.book 18 ページ ２００６年２月７日 火曜日 午後３時３３分