4—VGA Main Display Universal Elements
28 www.RolandUS.com Roland VS-2480 Owner’s Manual, Version Two Addendum
VGA Control Bar
The VGA main display’s control bar provides a wide assortment of important tools.
1. VARI PITCH Indicator
2. Write-Protect Indicator
3. Current Time Location Display
When the VARI PITCH parameter is turned on, the VARI PITCH
indicator lights.
When the current project is write-protected, the Write-Protect indicator
lights.
The Current Time Location display shows the current position of the
timeline in time code—hours/minutes/seconds/frames/subframes—
and in measures, beats and ticks. It also shows the most recent marker
and the marker’s name or—if it hasn’t been named—its time location.
You can navigate a project using the Current Time Location display, as described on
Owner’s Manual Page 126.
2.
8.
3. 4. 5. 6. 7.
12.
13. 14. 15. 16. 17. 18. 20. 22.
23.
19. 21.
1. VARI PITCH indicator 13. SCRUB
2. Write-protect indicator 14. PREVIEW buttons
3. Current Time Location display 15. Position bar
4. Mastering Controls 16. Transport buttons
5. Phrase sequencer controls 17. PREVIOUS/NEXT
6. Automix controls 18. MARKER
7. UNDO/REDO 19. TAP
8. EXT SYNC 20. LOCATOR (LOC)
9. Metronome 21. SCENE (SCN)
10. A.PUNCH 22. Scene name/number
11. LOOP 23. Project information
12. ABS/REL Indicator
1.
9. 10. 11.
182
99
Marker name/location
Measures, beats and tick location
Time code location
Most recent marker
126
To Next Page
Loading...
