Roland VS-2480 - Mastering Controls; Phrase Sequencer Controls; Automix Controls; Ext Sync

4—VGA Main Display Universal Elements
Roland VS-2480 Owner’s Manual, Version Two Addendum www.RolandUS.com 29
4. Mastering Controls
5. Phrase Sequencer Controls
6. Automix Controls
7. UNDO/REDO
8. EXT SYNC
9. Metronome
Click MASTERING ROOM to turn the Mastering Room on or off. When
it’s on, click Master Tracks Record to start recording mastering tracks.
Click:
• Phrase Sequencer On/Off—to turn the phrase sequencer on or off.
• Phrase Sequencer Record—to start or stop sequencing.
• Phrase Sequencer Undo/Redo—to undo or redo the last phrase
sequencer action.
The phrase sequencer can be activated only when at least one track’s phrase pad is
turned on—see Owner’s Manual Page 274.
Click:
• AUTOMIX—to turn the Automix feature on or off.
• Automix Record—to start or stop recording Automix data.
• SNAPSHOT—to take a snapshot of your mixer settings at the
timeline’s current mixer location.
• Automix Undo/Redo—to undo or redo your most recent Automix
action.
Click UNDO to reverse your last recording or editing action. If the
REDO light on the VS-2480 is lit, click REDO to restore your latest
undone action.
Click EXT SYNC so it lights to synchronize the VS-2480 to an external
device according to the current UTILITY menu Sync parameter settings.
Click the Metronome button to turn the VS-2480’s metronome on or
off by changing the setting of the METRONOME OUT parameter.
The parameter can be set to Off, INT (yellow) or MIDI (blue).
Master Tracks RecordMASTERING ROOM
343
Phrase Sequencer
On/Off
Phrase Sequencer
Undo/Redo
Phrase Sequencer Record
275
SNAPSHOTAUTOMIX
Automix Record Automix Undo/Redo
325
UNDO REDO
72
307
Off
MIDI
INT
370