Roland VS-2480 - FX Return Channel CH VIEW Elements; Loop Fx Assign; Effect Algorithm Display

6—VGA Main Display CH VIEW Screens
Roland VS-2480 Owner’s Manual, Version Two Addendum www.RolandUS.com 61
FX Return Channel CH VIEW Elements
LOOP FX ASSIGN
You can drag the pair of LOOP FX ASSIGN
nodes up or down with your mouse to route the
desired Aux bus or Direct bus to the effect
processor associated with the selected FX return
channel. (See Owner’s Manual Page 210.)
Effect Algorithm Display
The effect algorithm display shows the effect patch being used by the effect processor
associated with the selected FX return channel. Click anywhere on the effect algorithm
display to view the processor’s Algorithm View screen on which you can select a
different patch or edit the current patch.
LOOP FX
ASSIGN
Effect algorithm
display
Node
pair