Roland VS-2480 - EZ ROUTING Screen

22
Objects shown in the VGA display
EZ ROUTING Screen
fig.ezr.eps
PATCH BAY area
1. PHANTOM Power switch
Click this switch and get it to light if you want to supply phantom
power (+48 V) to the analog input XLR jacks (channels 1–8).
2. Digital Input Select switch
There are limitations on the channels that can be used between the
S/P DIF digital input and the R-BUS2 connector. Click the switch
for the input channel that you want to use, making it light.
3. Analog Input area
4. Digital Input area
5. INPUT MIXER area
You can make connections by dragging the connection point from the input
mixer to the jack.
1
3
2
5
4