Roland VS-540 - Blend Print (Metallic Silver + Cmyklclm)

24
Chapter 3 Printing
3-1 Print Job Setting
Chapter 3 Printing
Blend Print (Metallic Silver + CMYKLcLm)
This section describes how to perform the blend print with the metallic silver ink and CMYKLcLm ink.
 P. 18, “Blend Print and Layered Print (Metallic Silver and CMYKLcLm)”
To perform the blend print, you need to use the printing data where the use of the metallic silver ink and the
CMYKLcLm ink is designated.
 P. 12, “2-3 Creating Printing Data”
Procedure

Make sure that you have nished making the preparations for VersaWorks, getting the
printer ready, and creating the printing data ( page 9, "Chapter 2 -- Getting Ready").

Double-click .
Queue A Properties" window appears.

Click .
For [Media Type], select names with [MT]
attached such as "Generic Vinyl 1 [MT]".
Make the selection that matches the media to be
used. Selecting an item attached with [MT] enables
you to choose the print mode that can use the me-
tallic silver ink.
For [Print Quality], select [High Quality].
For [Mode], select [CMYKLcLmMt (v)].