Roland VS-640i - Page 40

38
Chapter 3 Printing Chapter 3 Printing
3-2 Print Job Setting : Equipped with White & Silver

For [Print Quality], select either [High
Quality] or [Standard].
With [Mode], select the print mode.
W -> CMYKLcLmMt(v)
Inks are overprinted in the sequence of white and
then metallic silver+CMYKLcLm Color.
CMYKLcLmMt -> W(v)
Inks are overprinted in the sequence of metallic
silver+CMYKLcLm Color and then white.
Image of overprinting in the sequence of white and then metallic silver/CMYKLcLm Color
(Print Mode "W -> CMYKLcLmMt (v) ")
* The white data and the metallic silver/CMYKLcLm color data are actually printed simultaneously, but they
are shown here as separate layers in order to indicate the printing sequence.
The printed
image is to be
seen from this
side (the printed
surface of the
nished results).
Transparent lm
White
Metallic silver/CMYKLcLm
VS-640i_USE2_EN_R1.indb 38 2013/07/23 19:00:28