Roland VS-640i - Printing a Metallic Color Chart

52
Chapter 3 Printing Chapter 3 Printing
3-5 Starting the Print Operation

Select the print job in the job list, and then
click
.
Printing will be started.
Printing a Metallic Color Chart (Equipped with Silver)
The Metallic Color Chart is the printing sample of the special metallic color. By printing the Metallic Color Chart,
you can conrm the “complete metallic color chart” representing the special metallic color itself that can be
printed with "Your Printer" and "Your Media" (slight pattern dierences is possible to occur depending on the
conditions of the printer and media.) By selecting colors from this color chart and creating illustrations with
these colors, you can accurately reproduce the desired colors.
*To print a chart, use the same media as the one actually going to be used.
Procedure

Make sure that you have nished making the preparations for VersaWorks, and getting
the printer ready ( P. 9, "Chapter 2 Getting Ready").

Double-click .
"Queue A Properties" window appears.
* Color chart output is available for Queue A only.
After printing, allow the ink to dry suciently.
We strongly recommend performing lamina-
tion.
To continue printing similar data, repeat steps  and  . Also, if you want to modify detailed
settings for each job, it will be convenient to perform modications in the "Job Setting" window
(which you can display by double-clicking the print job in the job list).
VS-640i_USE2_EN_R1.indb 52 2013/07/23 19:00:31