Roland VS-880EX - Insert and Send;Return Effects Configuration

67
Chapter 3: Recording Applications
(Creating a Template With EZ Routing - Continued)
22. Press the [PARAMETER>>] button until “Change Routing?” is displayed and press [YES].
After the VS-880EX is finished making the routing changes, “Complete” will be displayed
and you will be returned to the main play screen.
23. Press [EZ ROUTING] until “SaveCurRouting?” is displayed and press [YES].
24. Use the TIME/VALUE dial to select “001.”
25. Press the [PARAMETER>>] button and use the CURSOR buttons and TIME/VALUE dial to
name your template (e.g., “IN1-4 W/COMP”).
26. Press the [<<PARAMETER] button so that “001” is flashing and press [YES]. “Save Routing
001?” will be displayed. Press [YES] again to store your template.
Now that you have created a User template, you can recall those settings at a later time.
1. Press [EZ ROUTING] until “User Routing?” is displayed and press [YES].
2. Use the TIME/VALUE dial to select “EZR 001” and press [YES]. “Change Routing?” will be
displayed.
3. Press [YES].