90 VS-880EX Application Guide
Mixing your 8 VS-880EX tracks to stereo DAT digitally is exactly the same as recording to a stereo analog
recorder. With the VS-880EX’s default settings, the master analog outputs and the digital outputs contain
exactly the same information.
ACTION: Mix 8 Tracks To Stereo DAT - Digitally
1. Press the [FADER/EDIT] button until it lights green.
2. Press the [TR 1-8 STATUS] buttons until they light green (play mode).
2. Connect the DIGITAL OUT of the VS-880EX to the digital input of your DAT recorder.
3. Make sure that your DAT machine is set to record from its digital input (S/P DIF coaxial or
optical).
4. Make sure that the sampling rate of your DAT recorder matches the sampling rate of the
current song in the VS-880EX (some DAT recorders will do this automatically).
If you are unsure of the sample rate of your song, press the [PLAY (DISPLAY)] button,
then press [SHIFT] + [SONG] to display the sampling rate of the current song.
5. Set the panning and level to the desired position for each track on the VS-880EX.
6. Start recording on your DAT machine.
7. Press [ZERO] on the VS-880EX.
8. Press [PLAY] on the VS-880EX. Use the FADERS and PAN knobs to make any real time
adjustments.
9. Press [STOP] on the VS-880EX and your DAT machine when the song is finished.
Mix 8 Tracks To Stereo DAT - Digitally
To Next Page
Loading...
