Roland VS-880EX - Process Entire MIX with Internal EQ and Compressor

98 VS-880EX Application Guide
On some occasions you might already have a really good mix set up in your VS-880EX, but you find that
you would like to add a little more low frequency boost to the overall mix. In addition, you might want to
compress the dynamic range so your song will sound “louder” when played in your auto cassette player.
You will need to set up a normal mix situation, then assign the stereo mix to the effects processor, choose
the EQ and Compressor, then record your final mix.
ACTION: Process Your Entire Mix With Internal EQ And
Compressor
1. Press the [FADER/EDIT] button until it lights green.
2. Hold [SHIFT] and press the [FADER/EDIT] button.
3. Use the left/right [<<PARAMETER>>] buttons to display“MST FX1 INS Sw=.”
3. Use the TIME/VALUE dial to select “On.”
4. Press [EFFECT] (under EDIT CONDITION section) until “EFF EFFECT-1 PRM?” is
displayed.
5. Press [YES].
6. Use the TIME/VALUE dial to select “EF1 A66=CL:Comp.” Then, press [YES] to confirm
your selection.
7. Use the left/right [<<PARAMETER>>] buttons and the TIME/VALUE dial to adjust the
compressor settings.
8. Use the left/right [<<PARAMETER>>] buttons and the TIME/VALUE dial to adjust the EQ
settings.
9. Return the VS-880EX to the beginning of the song and press [PLAY]. All tracks will be
routed to the compressor and then to the mix bus to be recorded on your mastering device.
Any level or EQ changes will be recorded as well.
Process Entire Mix With Internal EQ And Compressor