Roland VS-880EX - Creating a Master Tape

Creating a Master Tape
When you finished recording a song, adjust the balance of each track (equalizer,
pan, and volume level), and using your stereo recorder, record a two-channel
stereo master mix to a stereo cassette, DAT, MD, or other media. This process is
called mixdown.
Here is how to record the analog signal output from the VS-880EX’s MASTER
jacks.
1
Connect the VS-880EX to your recorder.
For tips on making connections, refer to the owner’s manuals of your recorder.
2
Hold down [STOP] and press the STATUS buttons for all tracks
you want to mix down.
The STATUS indicators light green.
3
Press [FADER (EDIT)] several times to let the FADER indicator
light green. (Track Mixer)
4
Choose a track whose pan (the stereo position) setting you wish to
adjust. You should have all channel faders completely lowered,
except for the track whose pan setting you are adjusting.
3
2
5,114,7 9 13
6
Completing the Song (Mixdown)
46