If You Have Trouble Understanding Displays or Operations.
If you are unfamiliar with what is displayed on a screen or find you are having
difficulty understanding a certain procedure, press [PLAY (DISPLAY)]. This
allows you to return to the screen immediately that appears when the power is
turned on. Thus, you can try the procedure you were working on from the
beginning once more.
• If an operation has been performed incorrectly or cannot be executed correctly,
an error message appears in the display. When this occurs, please refer to
“Error Messages” (Appendices p. 9), and perform the specified measure.
• If even after you perform an operation using the prescribed procedure the result
differs from that stated in Quick Start or in the Owner’s Manual, please refer to
“Troubleshooting” (Appendices p. 6).
• If the above steps do not resolve your problem, contact a nearby Roland Service
Center or authorised Roland distributor.
Preparations
5
To Next Page
Loading...
