CV (Convert)
Here you can select how the sync track / tempo map
will be created. For this example, select “CV3.”
CV1=Tap→S.Tr: Create the sync track from mark
points.
CV2=Tap→T.Map: Create the tempo map from mark
points.
CV3=S.Tr→T.Map: Create the tempo map from the
sync track.
CV4=Time→S.Tr: Automatically create the sync
track.
6. Press PARAMETER [ ].
“Sync Trk Beat=” appears in the display.
7. Rotate the TIME/VALUE dial.
Sync Trk Beat (Sync Track Beat)
Specify the number of beats (1/1–8/1, 1/2–8/2,
1/4–8/4, 1/8–8/8) per measure in the MIDI clock that
is recorded in the sync track.
8. Press [YES].
9. A confirmation message asking if you want to
save the changes to the tempo map appears in the
display. If you want to save the changes, press
[YES]. If you wish to cancel, then press [NO].
10. When the tempo map has been completed,
“--- Complete ---” appears in the display.
11. Press [PLAY (DISPLAY)].
Return to Play condition.
Creating a Sync Track Automatically
You can automatically create a sync track by specify-
ing the start and end times of the song, and the num-
ber of measures that it contains. This is convenient
when you already know the length of the song, such
as with commercials.
1. Press [SYSTEM] several times until “SYS
Sync/Tempo?” appears in the display.
2. Press [YES].
3. Press PARAMETER [ ] several times until
“SYS Sync.Tr Cnv?” appears in the display.
4. Press [YES].
5. Rotate the TIME/VALUE dial.
CV (Convert)
Here you can select how the sync track / tempo map
will be created. For this example, select “CV4.”
CV1=Tap→S.Tr: Create the sync track from mark
points.
CV2=Tap→T.Map: Create the tempo map from mark
points.
CV3=S.Tr→T.Map: Create the tempo map from the
sync track.
CV4=Time→S.Tr: Automatically create the sync
track.
6. Press PARAMETER [ ].
“Start Time=” appears in the display.
7. Rotate the TIME/VALUE dial.
Start Time
Specify the song start time.
8. Press PARAMETER [ ].
“End Time=” appears in the display.
9. Rotate the TIME/VALUE dial.
End Time
Specify the song end time.
10. Press PARAMETER [ ].
“Measure=” appears in the display.
11. Rotate the TIME/VALUE dial.
Measure
Specify the number of measures (1–999) within a spec-
ified time.
12. Press PARAMETER [ ].
“Beat=” appears in the display.
13. Rotate the TIME/VALUE dial.
Beat
Specify the number of beat (1/1–8/1, 1/2–8/2,
1/4–8/4, 1/8–8/8) in one measure.
14. Press [YES].
15. A confirmation message asking if you want to
save the changes to the sync track appears in the
display. If you want to save the changes, press
[YES]. If you wish to cancel, then press [NO].
16. When the sync track has been completed,
“--- Complete ---” appears in the display.
17. Press [PLAY (DISPLAY)].
Return to Play condition.
Chapter 9 Use with MIDI Devices
125
Chapter 9
To Next Page
Loading...
