Roland XC-540 - Loading and Cutting off Media; How to Load Media

30
Chapter 2 Operation
2-2 Loading and Cutting Off Media
How to Load Media
CAUTION
Load roll media correctly.
Otherwise the media may fall and cause injury.
CAUTION
Roll media weighs about 30 kg (67 lb.). To avoid injury, handle with care.
CAUTION
Never load media that weighs more than 30 kg (67 lb.).
The machine may fail to withstand the weight and tip over or cause the media to fall.
1. Load the media onto the roll shaft.
➊
Open the front cover.
Move the media clamps to the sides.
➋
Attach the media flanges to the roll media.
➌
Place the roll media on the shafts.
Make sure the brake is engaged when you do this.
Press in to fit on securely.
Match to the inner
diameter of the roll-
media core.
Media flange
2 in.
3 in.
Media clampMedia clamp
Front cover
Shaft
Roll media
Brake
Shaft