2-4 Starting Output
40
Chapter 2 Operation
Printing Tests and Cleaning
We recommend performing a printing test to check for problems such as dot drop-out before you carry out actual
printing. If problems such as dot drop-out are found, clean the print heads.
How to Perform a Printing Test
Holding down for one second or longer prints
a test pattern.
You can print the test pattern where you want by using
to move the cutting carriage,
then pressing
. The front cover may be left open
during movement, but be sure to close it before you
press
.
ABC
Printing test
Dot drop-out
Hold down for one
second or longer.
To Next Page
Loading...
