Roland XC-540 - 5-1 Daily Care and Maintenance Procedures

4-2 Using the Take-up System
60
Chapter 4 Operation of the Media Take-up System
How to Operate the MANUAL Switch on the Take-up Unit
You can take up media by using the MANUAL switch.
How to Remove Taken-up Media
CAUTION
Removal of taken-up roll media from the unit is a task which must be carried out
by two or more persons.
Injury may result if attempted by one person without assistance.
Removing Taken-up Media
➊
Cut off the media.
☞ P. 35, "How to Cut Off Media"
Take-up with inward
curl
Take-up with outward
curl
➋
Support the paper tube to
prevent it from falling.
➌
Loosen the retaining
screw and move the
arm.
➍
Detach the paper tube
from the flanges.