5-4 Replacing Consumable Parts
76
Chapter 5 Maintenance and Adjustment
Replacing the Separating Knife
If the separating knife becomes dull, replace it with the included replacement knife.
CAUTION
Be sure to perform operations as specified by these instructions, and never touch
any area not specified in the instructions.
Sudden movement of the machine may cause injury.
CAUTION
Never touch the tip of the separating knife with your fingers.
Doing so may result in injury.
1.
Enter the blade replacement mode.
➊
Press .
Press
several times.
➋
Press .
Press
.
➌
Press .
Press
several times.
➍
Press .
The cutting carriage moves to a location permitting blade replacement, and
then the screen shown in the figure appears.
➎
Open the front cover.
Preparations are complete when this screen appears.
2.
Replace the separating knife.
➊
Remove the separating knife.
➋
Install a new knife.
The knife is secured in place by the magnet.
1
2
Magnet
Positioning
groove
MENU
SUB MENU
MAINTENANCE
REPLACE KNIFE
SUB MENU
MAINTENANCE
FINISHED?
OPEN FRONT
COVER
NOW PROCESSING..
1. Loosen the screw until it slips out.
2. Grasp the screw portion, and slowly pull it out in the
direction of the arrow. When doing this, do not pull it back
toward you.
To Next Page
Loading...
