Roland XC-540 - Giving Priority to Image Quality; Changing the Menu Language and the Units of Measurement

6-5 Setting How the Printer Operates
94
Chapter 6 Feature Reference
Giving Priority to Image Quality
Procedure
➊
Press .
Press
several times.
➋
Press .
Press
several times.
➌
Press .
Use
to select "DISABLE."
Press
to enable the setting.
➍
Press .
Press
to go back to the original screen.
Description
This setting determines whether priority is given to efficient ink use or to image quality. It is displayed only when four-
color inks are used (cyan, magenta, yellow, and black). This setting is valid only when using four-color inks and
performing bidirectional printing. Also, some high-speed print modes may not be affected by this setting.
When set to "ENABLE," ink is used more efficiently, with nearly no sacrifice in image quality.
When set to "DISABLE," priority is given to image quality over efficient use of ink.
Default Setting
[ALTERNATE HEAD]: ENABLE
Changing the Menu Language and the Units of Measurement
Procedure
➊
Hold down and switch on the sub power.
Use
to select the display (menu) language.
Press
.
➋
Use to select the measurement unit for length.
Press
.
➌
Use to select to the measurement unit for tempera-
ture.
Press
.
Description
This sets the language and units of measurement displayed on the printer's screen.
Default Setting
[MENU LANGUAGE]: ENGLISH
[LENGTH UNIT]: mm
[TEMP. UNIT]: ˚C
W 1346mm
SETUP SHEET
ROLL
MENU
SUB MENU
SUB MENU
ALTERNATE HEAD
ALTERNATE HEAD
ENABLE
DISABLE
MENU LANGUAGE
ENGLISH
LENGTH UNIT
mm
INCH
TEMP. UNIT
C
F