10
Reset to default factory settings
Before using XP-80 for the first time, reset it to its default factory settings using Factory Preset.
Different settings may result in unexpected effects.
✳ Factory Preset operation resets all data in the internal memory and user memory to factory pre-
sets. Save any important data to a disk before executing this operation (p.168) in the XP-80
Owner’s Manual.
<Procedure>
❶ Press [UTILITY].
❷ Press the numeric key [8], then [ENTER].
The Factory Preset display (UTILITY/Factory) will appear.
❸ Press [F6] (Execute).
If “Write Protect ON” message is displayed, press [DEC] to turn the setting OFF. After pressing
[EXIT] to clear the message, press [F6] (Execute) again to reset to the factory preset settings.
Select and play Patches
The XP-80 contains a large number of sounds ready for you to play. The sounds that you select
and play on the XP-80 are generally called ‘Patches.’ Here’s how to select and play Patches.
<Procedure>
❶ Press [PATCH].
The Play display (PATCH) will appear.
To Next Page
Loading...
