26
❻ Press [REC].
The Step Recording display (SEQ/Micro) will appear.
This completes preparations for recording. Now let’s record the notes by following the staff
notation.
❼ Select the step time (note length) for the first note. The first note to be input is a quarter note.
Move the cursor to “Step Time,” and make sure that “ ” is displayed.
❽ Press the G2 key for the first note.
Releasing the key finalizes the value so that you can enter the next note.
✳ To correct a wrong note entry, press [F2] (StpBack) or [BWD] to erase the most recently-entered
note, and input it again.
To Next Page
Loading...
