Accommodating to the Types and Condition of Media
4
Part of
Practice
118
Preventing Soiling of the Media and Dot Drop-out
Procedure
Press .
Press several times to display the screen shown
on the left.
Press
.
Press several times to display the screen shown
on the left.
Press
.
Press to select an item.
PAGE
Automatic cleaning is performed every time before printing starts.
10 to 990 min
Automatic cleaning is performed when the cumulative printing time
reaches the value you set here.
NONE
Automatic cleaning is not performed.
Press to enable the setting.
Press in this order to go back to the original screen.
Description
In the following cases, Ink tends to collect on the surface of the heads. Under some conditions, this ink may
be transferred to the media or cause dot drop-out. Use this feature at such times.
When you use media prone to buildup of static charge.
When the ambient temperature is low.
When the head height is set to “HIGH.”
Selecting "PAGE" or a value from "10 min" to "990 min," the ink buildup is removed before or during printing
while printing is performed. Note, however, that using "PAGE" or a value from "10 min" to "990 min," results
in longer printing times.
Default Setting
[PERIODIC CL.]: NONE
To Next Page
Loading...
