Roland XR-640 - Page 48

Loading Media
2
Basic Operation
46

Close the front cover.

Press to select "ROLL."
Press
.

Press .
The print-head carriage moves and detects the width of media. This operation is called initialization.
When initialization ends,
remains steadily lighted, and the printable width is displayed on the
display screen. This completes loading of the media.
SETUP SHEET
ROLL
Remove when not using roll media.
If roll media is allowed to stand unused in a loaded state for an extended period, the media may sag.
This can cause poor printing quality and motor errors, so be sure to remove and store such media
when not in use.