Roland XR-640 - Adjusting the Head Height

2
Setup of Media
Basic Operation
52

Use to set the temperature.
Recommended temperature: 50 °C
Press to enable the setting.
For the individual setting method of this setting item and the description, refer to  P. 106, "Making the Tem-
perature Setting for the Media Heating System"
3. Adjusting the Head Height

Press to select [CHANGE].
Press
to enable the setting.

When the left gure is displayed, open the front cover.

Move the height-adjustment lever to adjust
the head height.
When moving to the [High] direction, the buzzer
sounds twice, and to the [Low] direction, the buzzer
sounds once.
DRYER 50
50 50
To cancel the setting
Procedure

Press during the setting.

Press to select [YES].
Press
.
The screen returns to the screen shown at the left.
By selecting [NO], the screen returns to the screen dis-
played when you pressed
.
QUIT SETTING?
YES [NO]
MENU
MEDIA SETTING
HEAD HGT LOW
[CHANGE] NEXT
HEAD HEIGHT
LOW LOW
Normally set to [Low]. For the media that is
wrinkled and comes loose from the platen, set
to [High].
High
Low
Height-adjustment lever
Move rmly, until it stops.