3
Maintenance
Replacing Consumable Parts
94
Insert the new felt wiper.
Attach the Hook.
Make sure to attach the hook. Otherwise it cases
dot-drop out or else.
3.
Quit the felt wiper replacement menu.
Attach the cover R.
Close the front cover.
Press .
After the process to quit the felt wiper replacement menu, the screen
shown in the gure appears.
Press in this order to go back to the original screen.
4.
Perform a printing test to verify the results of the procedure.
Perform a printing test to check the result.
P. 63, "Printing Tests and Normal Cleaning"
To Next Page
Loading...
