Roland XV-5080. - Page 238

238
Error Messages
Source Disk Incorrect!
Cause: The operation you are attempting to execute
does not support this media.
Action: Do not select this media as the object of the
operation.
This Will Clear the File(s)/Folder(s).Are
You Sure?
Condition: The file(s) or folder(s) will be deleted from the
disk. Is it OK to execute?
Action: To cancel the operation, press [F1 (CANCEL)].
To execute the operation, press [F6 (DELETE)].
Too Many Files!
Cause: The maximum number of files that can be
created in a folder has been exceeded.
Action: Either delete unneeded files (p. 197), or write the
file to a different folder.
Too Many Folders!
Cause: The maximum number of folders that can be
created in a folder has been exceeded.
Action: Either delete unneeded folders (p. 201), or create
the folder in a different folder.
Unformatted Memory Card
Situation: This memory card cannot be used by the XV-
5080.
Action: Format the memory card on the XV-5080.
Unknown Disk Error!
Cause: A disk error of unknown causes has occurred.
Action: Contact your dealer or a nearby Roland service
center for service.
User Memory Damaged
Situation: The data in user memory has been lost.
Action: Use the Factor Reset function (UTILITY/UTIL
2/FACTORY RESET) to initialize the memory to
the factory settings.
User Memory Write Protected
Situation 1: The Internal parameter (UTILITY/UTIL 1/
PROTECT/WRITE PROTECT) is turned ON.
Action 1: Turn the Internal parameter OFF.
Situation 2: The Exclusive parameter (UTILITY/UTIL 1/
PROTECT/WRITE PROTECT) is turned ON,
and Exclusive messages cannot be received.
Action 2: Turn the Exclusive parameter OFF.
User Performances (Patches/Rhythm)
Full
Choose User location and OK to
overwrite
Situation: Although the specified data was loaded, the
required free space for the Performance (Patch/
Rhythm) is not available.
Action: Either press [OK] and overwrite, or delete
unneeded Performance (Patch/Rhythm) data
and load again.
Write Protected!
Cause: The Zip disk is write protected.
Action: Provide a different media that can be written.
You Cannot Use This Device!
Cause: The operation you attempted to execute does not
support this media
Action: Do not select this media for this operation.