Rolex Cellini DATE - Page 9

8
USING
YOUR WATCH
ROLEX
SERVICE
THE HEART OF THE
CELLINI MODELS
SETTING THE
CELLINI TIME
Screwed-down position (position 0):
the crown is completely screwed down
against the case. When the crown
is in this position, the Cellini Time
is guaranteed waterproof to a depth
of 50metres (165feet).
Manual winding (position 1):
the crown is unscrewed. To wind
the watch manually, turn the crown
clockwise. (Turning in the other
direction has no effect.) When setting
the watch for the first time or if the
watch has stopped, complete a minimum
of 25turns for partial winding.
Setting the time (position 2):
the crown is unscrewed and pulled out
to the first notch. The seconds hand
is stopped, allowing you to set the
time to the precise second. To set the
hour and minute, turn the crown in
eitherdirection.