Setting the date (position 2):
the crown is unscrewed and pulled out
to the first notch. To set the date, turn
the crown in either direction. The hour
hand moves in increments of one
hour and the date changes every other
time the hour hand passes 12o’clock.
During this oper ation, the watch
continues tofunction.
Setting the time (position 3):
the crown is unscrewed and pulled out to
the second notch. The seconds hand
is stopped, allowing you to set the time
to the precise second. To set the hour
and minute, turn the crown in either
direction. To avoid confusion between
a.m. and p.m. hours, move the hour
hand to 12 o’clock. If the date changes,
it is midnight.
To Next Page
Loading...
