COMPLETE SETTING OF THE WATCH
IS CARRIED OUT IN TWO STEPS
IN THE ORDER GIVEN:
1. Setting the reference time:
To set the reference time, follow the
steps in the order given:
– Unscrew the crown and then pull it
out to the second notch (position3).
The seconds hand is stopped,
allowing you to set the time to the
precisesecond.
– Set the reference time by turning
the crown in either direction.
Note the differ ence between a.m.
and p.m. hours by checking the
day/nightindicator.
Setting the reference time also moves
the conventional hour and minute
hands (local time). For this reason, the
reference time should be set before
setting the local time.
Go to step 2
To Next Page
Loading...
