3. Setting the minute:
– Pull the crown out to the second notch
(position 3). The seconds hand is
stopped, allowing you to set the time
to the precise second.
– Set the minute by turning the crown
in either direction. The other functions
(hour, date and moonphase) are
synchronized accordingly.
– Push in and then screw down
thecrown.
If a previously correctly synchronized
watch has stopped for nomore than two
days, it is possible to adjust it simply
by pulling out the crown to the second
notch (position 3). First adjust the date,
then the hour and then the minute
by turning the crown clockwise. The
moonphase issynchronized accordingly.
To Next Page
Loading...
