Rolex DEEPSEA - Page 13

12
USING
YOUR WATCH
ROLEX
SERVICE
THE HEART OF THE
ROLEX DEEPSEA MODEL
Setting the date (position 2)
The crown is unscrewed and pulled out
to the first notch. To set the date, turn
the crown clockwise. (Turning in the
other direction has no effect.) During
this operation, the watch continues
tofunction.
Setting the time (position 3)
The crown is unscrewed and pulled out
to the second notch. The seconds hand
is stopped, allowing you to set the time
to the precise second. To set the hour
and minute, turn the crown in either
direction. To avoid confusion between
am and pm hours, move the hour
hand to 12o’clock. If the date changes,
it ismidnight.