How to fix blurred pictures with Rollei AFM 35?
To correct blurred pictures, make sure your fingers aren't obstructing the AF windows and that the AF area is focused on your subject. Try cleaning the front lens, holding the camera steady when pressing the shutter, and using a tripod for slower shutter speeds. Also, set the proper distance and use focus lock or focus manually.
Why are my Rollei AFM 35 pictures too dark?
If your pictures are too dark, ensure your flash has finished charging before shooting. You might also try selecting a different f-stop or switching to P in aperture-priority AE. Consider switching to fill flash, observing the flash range, and avoiding covering the flash with your finger. Additionally, switching to fill flash or backlight compensation may help.
Why are my Rollei AFM 35 Film Camera pictures too light?
If your pictures are too light, select a different f-stop or switch to P in aperture-priority AE. Also, avoid being too close to the subject; step back until the warning lamp stops blinking. Selecting another mode may also resolve the issue.
Why is no date visible in my Rollei Film Camera picture?
If no date is visible in your picture, set the proper date format. Also, frame your subject so that the date is imprinted against a dark background.
General| Focus | Autofocus |
|---|---|
| Flash | Built-in flash |
| Film Advance | Automatic |
| Type | 35mm Film Camera |
| Exposure Control | Automatic |
Safety warnings regarding internal components, high-voltage circuits, and handling damaged or wet cameras.
Guidelines for proper battery loading, polarity, and avoiding hazardous conditions like recharging or fire.
Lists common reasons why the camera's shutter may not release, such as no battery or closed lens cover.
Details the main controls of the camera, such as the main dial, focusing dial, and various buttons, with their purposes.
Identifies and explains the external parts of the camera, including strap lugs, dials, buttons, and lenses.
Details internal parts like the viewfinder eyepiece, film cartridge compartment, and take-up spool.
Explains the various symbols and readouts on the camera's LCD screen, including frame counter and battery status.
Describes the viewfinder's autofocus frame, parallax marks, and AF/AE indicators.
Step-by-step instructions for properly inserting the CR2 lithium battery into the camera.
How to check the battery level using the LCD panel and interpret the battery icons.
Guide to loading DX-coded film for automatic film speed setting.
Explains the automatic film rewinding process after the last frame and how to open the camera back.
How to operate the main dial to turn the camera on and off, and the lens cover's function.
Guidance on how to hold the camera steady to avoid shake and ensure sharp images.
Solutions for issues like shutter not releasing, frame counter errors, and focusing difficulties.
Addresses common causes of blurred images, including camera shake, focus errors, and obstructed windows.
Solutions for problems such as underexposure, overexposure, and incorrect or missing date imprinting.
To Next Page
