Need help?Do you have a question about the Rollei DF-S 100 SE and is the answer not in the manual?
General| Image Sensor: | 5 mega CMOS sensor |
|---|---|
| Lens: | F no.=2.0, 4 Glass elements, |
| Focus Range: | Fixed focus |
| Exposure Control: | Automatic |
| Color Balance: | Automatic |
| Light Source: | Back light (3 white LEDs) |
| LCD: | 2.4’’ Color TFT LCD |
| Internal memory: | 24MB NAND Flash (for saving images) |
| Scan Quality: | 1, 800 dpi |
| Data Conversion: | 10 bits per color channel |
| Scan Method: | Single pass |
| Interface: | USB 2.0, TV‐out (video 3.5mm jack) |
| USB Configuration: | Mass Storage Device Class/MSDC |
| Power: | 5V adapter, or USB power |
Weight and Dimensions| Dimensions: | 82x86x152mm |
|---|---|
| Weight: | 0.41kg |
Lists and illustrates all parts included with the Rollei DF-S100 SE scanner.
Guidance on cleaning the scanner's glass surface and components for optimal image quality.
Step-by-step instructions for loading slides into the holder.
Procedure for loading negative film strips into the holder.
Instructions for attaching and loading slides into the rapid slide feeder.
Tip regarding film orientation for negative film to avoid mirror images.
Diagram identifying device buttons, ports, and slots for operation.
Steps for film loading, connecting USB, and powering on the device.
Instructions for capturing an image and navigating the initial scanning menu.
Overview of main menu options: Capture, Playback, Film Type, USB, and Settings.
Using capture mode, navigation keys, and basic image adjustments like mirroring and flipping.
Accessing and adjusting brightness, red, green, and blue color balance.
Understanding capture mode indicators, edit menu, saving, and rotation.
Returning to menus, managing memory/SD card status, and error handling.
Viewing images, slideshows, editing, and deleting in playback mode.
Setting film types and connecting via USB for data transfer.
Configuring TV output and formatting memory storage.
To Next Page
