44
ENGLISH
Quick Settings
Format:
– This function will delete all images and videos stored on the SD card. Make
sure to backup the Databefore using this function. It is highly recommended
to format new SD cards.
Default:
– Restores the default settings. Default settings are as following: Photo, 5MP,
1Pict, Serial number and so on.
Camera Name:
– Select a specific Name for the camera to identify different shooting
locations by numbering when multiple cameras are in use at the same time.
After set, the entered name of the camera will be shown as a stamp on the
photos and videos.
Language:
– Select English or German as the Language on screen.
Password:
– You can set a password for the camera that will be asked for when you
switch the camera on. Please make sure to note this password down. For a
reset of the password when forgotten you need to contact the after sales
service.
Software Update:
– To Update the actual Firmware if any new Version will be available.
Version:
– Shows the Version Number of the actual installed Firmware.
To Next Page