Use
of otherflash units
Wen using any standardflashgun, set the shutter speed
control knob to
"X".
This settinggives
aflash
synchroni-
sation speed of
1/lOO
sec.
Iffor
any
reason
a longer shutter
speed is require,
any
manually
set shutter speed between
I/tm
sec. and 16 sec. may be used.
Exytosure
meter werrtde
It may
occasionally occur
that
youwish
to apply a con-
stant over-ridefactor
to
the exposure system,for example
you
may wish to use,for a specific
purpose,films
loaded
invarious magazines and to
apply a uniform exposure
over-ride to each on a specffic
assignment.
In
this case
you
should
use
the over-ride control 14 and
set it to
the
desiredvalue between
-
I to
+
2 EV over-ride inclusive.
The
"*"
settingwill increase the exposure timewhile the
"-"
settingwill
reduce
it.
Note: Ensure
you
return the
over-ride control to
,0"
when
no longer required.
29
To Next Page
Loading...
