IECHNICA1 DAIA
Type: Single
lens reflex
camera
24x36 mm,
with interchangeable film magazine, two
integral viewfinder
systems
and integral
motor
drive.
Lens Mount:
Rollei
QBM
bayonet
(Quick
Bayonet Mount).
Electronics:
Fully
integrated
analogue/digital
interface circuits. Centralised
control of all exposure
measurement
and
motor drive functions.
Shutter:
Vertically travelling metal-laminate
focal
plane
shutter Electronically controlled.
Exposure Control:
Aperture
priority
automatic shutter speed control or
full manual operation
(follow-up
system).
Exposure
Override: From
-1to*2
EVstops.
Exposure Times:
l/rooo
sec. to 16 secs., automatically
or manually adjustable. Long-time exposure
B.
Flash synchronisation speed
1/roo
s€c.
to 16
sec.
X:
t/too
sec.
Exposure Measurement:
Through the lens selective measurement. Exposure
measurement field visible
in viewfinder.
Measuring range EV 1-18 with 21 DIN
(100
ASA) andf
11.4.
Sensor:
2 silicon
photo
diodes.
Viewfinder Systems:
2 integral viewfinders. Eyelevel
viewfinder with adjustable ocular
for dioptric correction and rubber
eye-cup. Folding reflex viewfinder
hood with built-in magnifier
Viewfinder Informatibn: Apertures and speeds
indicated by light emitting
diodes
(LEDs).
Over
and under exposure warning.
Battery state control.
Flash control signal and under exposure control
when using dedicated
flash
system.
..
Memo function.
Viewfinder
Screens: Special
interchangeable screens
-
standard
screen
with
double diagonal
split image, microprism and
matt
outer area
with fresnel
screen.
Back
Light
Correction:
Memory
lock
(memo)
and override switch
(-1
to *2 EV).
Delayed
Shutter
Release: Electronically controlled with
10
sec. delay.
Aperture Operation:
Fully automatic diaphragm
linked
to
metering mechanism with automatic changeoverwhen stop-down
metering is employed
(e.g.working
with
adapter
on microscope, mounting non-Rollei lenses
with
M 42 adapter etc.).
Reflex Mirror: Hard coated upper surface.
60
To Next Page
Loading...
