On/off pilot light Front drip tray
Thermostatic pilot light Back drip tray
Thermostat/commutator
5. FUNCTIONING / MANIPULATION
a) Installation / assembly:
- Unpack carefully the device of its packaging.
- Place the waffle machine on a plane and heatproof surface.
- Never place the device near a wall or near a partition makes of combustible
materials even if it is very well isolated.
- A distance of minimum 10 cm with the partition or the wall is necessary.
- Place the machine to enable easy access to the plug.
- Remove the protective film from all stainless steel parts
- Place the accessories
17
4
5 2
3
1
4
5
1
2
3
To Next Page
Loading...