What to do if my Roma Medical Reno II P319 Wheelchair fails to operate?
If your Roma Medical Wheelchair fails to operate, ensure that: * The unit is switched on. * All plugs and connections are firmly fixed. * The battery level shows a full charge. * The freewheeling device is in the drive position. * The circuit breaker hasn't tripped. * The battery and controller lead are properly connected.
General| Foldable | Yes |
|---|---|
| Seat Width | 18 inches |
| Seat Depth | 16 inches |
| Maximum User Weight | 115 kg |
| Overall Width | 24 inches |
| Overall Height | 36 inches |
| Wheel Size | 24 inches |
| Frame Material | Aluminium |
The primary control interface for operating the powerchair.
Battery pack designed for easy removal for charging or storage.
Safety feature preventing the powerchair from tipping backwards.
Essential actions and practices recommended for safe powerchair operation.
Prohibited actions and conditions to avoid for user safety.
Detailed steps for safely removing the battery pack.
Describes the battery gauge for monitoring power and faults.
Details how the joystick controls speed and direction.
How to use the lock function to prevent unauthorized use.
How to start moving and control the direction of the powerchair.
Guidance on safely ascending kerbs.
Instructions for safely descending kerbs.
Important safety warning regarding disassembly and lifting.
Instructions on how to separate the powerchair frame.
Guide on reattaching the front chassis to the rear.
How to reconnect the two parts of the powerchair frame.
To Next Page
