RoomAndLoft Murphy - Page 10

WALL
FLOOR
PLEASE LIFT!
(DO NOT DRAG)
GRAB CORNERS
1 CORNER PER PERSON
Standing up the Bed Case
Step 1: With two people, take hold of the
top corners of the bed case and safely lift to
stand up the Bed Case.
Step 2: Position the bed case against the wall by lifting and carrying
– PLEASE do not drag the bed case on the floor.
Step 3: Check the exterior measurement of the Bed Case side panels at the floor, and make
sure it measures 64.3/4 inches, no more, no less.
9