16
RootsScrub E430
At the end of cleaning
Ÿ Stop the machine and lift the brush head.
Ÿ Lift the squeegee.
Ÿ Drain and rinse the dirty water tank (refer to section "Dirty
and Fresh Water Tanks" )
Ÿ Clean the sealing strips at the squeegee.
Ÿ Check the strainer upstream of the intake opening in the
fresh water tank; clean if required, as otherwise the suction
efficiency will be affected.
The machine must not be cleaned by water jet or
high pressure cleaning equipment, as this will
endanger its proper working function.
PROCEDURE FOR SCRUBBING
To Next Page
Loading...
