Seite - 51 -
04.10.2008 / LSV - JWh/ Rev. 02
DIGIDOS 24 AT
© 2008
WARNINGS AND NOTES
4 WARNINGS AND NOTES
4.1 Warning: „Cavitation CAV“
Immediate measure:
Decrease the speed or close the pressure outlet.
4.2 Note: „Unable to Achieve Proportioning Rate“
If the set proportioning rate cannot be attained, the following
message appears: „Unable to achieve proportioning rate!
Reduce proportioning rate or water intake!“. This can
happen if, on the one hand, the water flow rate is high and the
proportioning rate is set to a high value or if, on the other hand,
the water pressure is too high due to a high power rating.
4.3 Note: „Malfunction direct injection foam
proportioning system“
The message „DIGIDOS malfunction! Direct-injection foam
proportioner not ready for operation!“ appears if part
of the electronics unit is not ready for operation.
This means that foam operation is NOT possible.
Measure: Check the cables
To Next Page
Loading...
