Page - 57 -
FLF 15000/1800/500
Panther 8x8 CA-7
© 2014
Air Crash Mode
Bumper Turret RM 15 C
Description of RM 15 C
The electronically controlled RM 15 C turret, which is mounted on
the front bumper is designed for water operation as well as for
water/foam operation.
1 foam pipe *
2 deflector *
9 non aspirating nozzle
E17 turret search light *
H66 pilot lamp: indicates turret engaged
M11 motor for rotation with handwheel for manually operation
M12 motor for elevation with handwheel for manually operation
Description of control elements of the turret RM 15 C
The turret is remotely controlled from the drivers cabin. This is
done by a joystick. The turret follows the movement of this joystick.
19 joystick for bumper turret
H94 position LED
S80 toggle switch for bumper turret discharge valve
S80p permanent bumper turret discharge switch - with integrated
pilot lamp which indicates open discharge valve *
S81f bumper turret nozzle adjustment switch -> full jet
S81s bumper turret nozzle adjustment switch -> spray
S218 START - switch
S219 STOP - switch
S221 discharge reduction switch *
S291 switch: activation of oscillator operation *
S292 switch: oscillation adjustment *
S291 S218 H94
S80p
S219
S81s S292
S80
S80p
19 S81f
CAUTION !
Before activating the turret control please make sure to have
enough operation area available.
Sight contact with the turret discharge is absolutely essential!
Never point the discharge jet at anybody.
DANGER OF INJURY TO PERSONNEL!
E17 M12H66
9 M11
To Next Page
Loading...