EasyManua.ls Logo

Rosenbauer FLF 15000 PANTHER - Pump

Rosenbauer FLF 15000 PANTHER
117 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page - 9 -
FLF 15000/1800/500
Panther 8x8 CA-7
© 2014
Technical Data
Pump
Manufacturer and type: ROSENBAUER N 100
Performance at tank
suction operation: 9000 l/min at 11 bar
Closing pressure: 13.5 bar
Design: single stage
Pump speed: max. 1800 rpm
Pump shaft seal: mechanical seal
Rotating direction of pump: counterclockwise
Material of casing, bronze
diffusers and impellers: bronze
Operating ability: from -15˚ C to +50˚ C ambient
temperature
Allowed fluids: fire fighting water or drinking water
Fluid temperature
range: from +4
°
to +60
°
C
Tank suction connection: DN 200 butterfly valve
Drafting connection: DN 125 butterfly valve with 4" BSRT
male coupling on the left hand side
Pressure outlets: 2 x DN 65 butterfly valves with 2
1
/2"
BSS female couplings;
These connections are on the left
and right hand sides.
Main pump valve: DN 150 butterfly valve
Roof turret: DN 125 butterfly valve
Bumper turret: DN 65 butterfly valve
Untertruck nozzles: DN 50 ball valve
Tank fill line: DN 50 ball valve
Rapid intervention con.: 2 x DN 40 ball valves
Foam drafting- and DN 50 ball valve with Storz C
flushing connection: coupling on the left hand side
Pump drain valve: DN 20 ball valve
Internal flushing valve: DN 40 ball valve
Drive: propeller shaft from cTv