Installation Guide
1.Unscrew the 4 screws and pull the top panel
2.Slightly open both side panels.
3.Remove the top panel.
Pull out the front panel from the bottom.
Install the PSU and secure with 4 screws.
Install either 2x 3.5" or 2x 2.5" HDDs on main
HDD rack.
Unscrew the 8 screws, and take out the main and
secondary HDD racks.
Install the motherboard and display card.
01
02
03
04
Install either 2x 3.5" or 1x 3.5" & 1x 2.5" HDDs on
the secondary HDD rack.
07
05
06
Thank you for purchasing a High-Quality Rosewill Product.
Please register your product at : http://www.rosewill.com
for complete warranty information and future support for your product.
If you have any question while using our products, please visit our website : www.rosewill.com
for latest driver & user manual or feel free to contact us.
Support Phone Number: 800-575-9885
Support Email: techsupport@rosewill.com
3.5”HDD or SSD
3.5”HDDx23.5”HDDx1 + SSDx1
Install the main HDD rack.
(Note: If Dual-PCI-Solt display card is applied,
please remove the secondary HDD rack.)
08
Install the secondary HDD rack.
09
Install the panels step by step.
10
4
© All rights reserved by Rosewill
5
© All rights reserved by Rosewill
User’s ManualLegacy V6
CASE
User’s ManualLegacy V6
CASE
To Previous Page
Loading...
