Stand Mixer Rosmarino Infinity PRO
Overview of the Components
Using the Mixing Bowl
• In order to lift the arm, clockwise rotation the Rise knob (2). The arm will now move upwards. (FIG1)
• Place the pot cover into its body. (FIG2)
• Place the mixing bowl into its holding device (Step1) and turn the bowl clockwise until it locks into place
(Step 2). (FIG3)
• Mount the required utensil (Dough hook or Beater or Whisk) by inserting the top into the output shaft,
and turn anti-clockwise until it locks into place. (FIG4&FIG5)
• Now ll in your ingredients.
Do not overll the machine - the maximum quantity of ingredients is 1.5kg.
• Lower the arm using the rise knob (2). (FIG6)
• Insert the mains plug into a properly installed 220-240V 50/60 Hz safety power socket.
1 Output shaft
2 Rise knob
3 Speed knob
4 Power Cord
5 Mixing bowl
6 Dough hook
7 Beater
8 Whisk
9 Pot cover
• Switch the machine using the speed knob to a speed between 1 and 6 (corresponding to the
mixture).
• For pulse operation (kneading at short intervals), turn the switch to the “PULSE” position. The
switch must be held in this position according to the desired interval length. When the switch is
released, it returns automatically to the “0” position.
• After kneading/stirring turn the speed knob (3) back to the “0” position as soon as the mixture
has formed a ball. Then remove the mains plug.
• Push the rise knob (2) downwards and the arm will be raised.
• The mixture can now be released with the help of a spatula and removed from the mixing bowl.
• The mixing bowl can now be removed.
• Clean the parts as described under “Cleaning”.
To Next Page
Loading...
