Ross Acuity 4810AR-002 - Bus Map Management; Assigning Bus Maps

Tip: Press More > Default Map to default the selected
map, or Default ALL Maps to default all maps.
3. Select or edit the button on the shift level that you
want to assign a video signal to. Use the middle knob
to scroll the list. The button lights on the program
bus of all panel rows.
• Insert — insert a source at the selected button
and shift the remaining sources to the right.
• Delete — delete a source at the selected button
and shift the remaining sources to the left.
• Clear — remove the source from the selected
button and not shift the remaining sources. None
is selected for the cleared buttons and the last
button when a source is deleted.
• Copy — copy the source from the selected
button.
• Paste — paste the copied source to the selected
button.
4. Use the Source knob to select the video source that
you want to assign to the selected source button.
• NONE — no video source is assigned to the
button.
• BKGD 1-2 — the color background from the
matte generator.
• BLCK — internally generated black.
• ME X — the program output of another ME for
re-entries. Button is blank if it is the same ME.
• SHFT X — switch the source buttons to the
selected shifted bus row.
• STIL X — the output of the selected
Global-Store channel.
• ME X ST Y — the ME-Store channel (Y) of
select ME (X).
• MEX PGM Y — the congurable program
output (Y) of ME (X).
• ME X PV Y — the congurable preview output
(Y) of ME (X).
• PV OVL — the preview with overlay output of
the program ME of the switcher.
• Key Cut — perform a cut of the AuxKey key
on the aux bus that the source button is pressed
on.
• KeyTrans — perform an auto transition of the
AuxKey key on the aux bus that the source
button is pressed on.
• BKGDCUT — perform a cut of the AuxKey
background on the aux bus that the source button
is pressed on.
• BKGDTRANS — perform an auto transition of
the AuxKey background on the aux bus that the
source button is pressed on.
• K+B CUT — perform a cut of the AuxKey
background and key on the aux bus that the
source button is pressed on.
• K+B TRANS — perform an auto transition of
the AuxKey background and key on the aux bus
that the source button is pressed on.
• Bus Hold — the currently selected source on
the bus that you select the Bus Hold for, does
not change when a memory recall is performed.
This is the same as holding the crosspoint button
when performing a memory recall. On an Aux
Bus, the Bus Hold toggles the Aux Bus Lock on
and off.
• MVX — the output of the selected MultiViewer
channel.
• BNC — the video source on the selected input
BNC.
5. Press HOME > Confirm.
To Name a Bus Map
1. Press HOME > Setup > Bus Maps > More.
2. Use the Map knob to select the bus map you want
to rename.
3. Press Rename Map.
4. Enter the new name in the New Name eld.
5. Press Accept New Name.
To Copy a Bus Map
1. Press HOME > Setup > Bus Maps > More >
Copy Map.
2. Use the Copy From knob to select the bus map
you want to copy from.
3. Use the Copy To knob to select the bus map you
want to copy to.
4. Press Copy Map.
Assigning Bus Maps
Bus maps can be assigned to the program/preset, key, or
utility buses of each ME, or to each Aux Bus. Bus Maps
can be assigned to individual buses, ME, Aux Buses, or
to the entire panel. Bus map assignment are control panel
specic and do not affect the Bus Map assignments on
other control panels.
Bus map assignments are stored in the personality register
of the switcher.
28 • Video Input Setup — Acuity Setup Manual (v9.2)