Ross Carbonite Series - Custom Controls; Custom Control Events

DescriptionLocationEvent
4. Click the Component button and
select the HSL component you
want to assign a value to. A
value should be applied to all
three components.
5. Enter a value for the selected
component in the Value (%)
field.
Select the preset color you want to
apply to the border of the DVE key of
the selected key for the selected area.
Switcher >
Keyer > DVE
Border Color
(Preset)
DVE Key Border
Color (Preset)
1. Click the ME button and select
the area that you want to
perform the event on.
2. Click the Keyer button for the
key you want to perform the
event on.
3. Click the Color button and select
the preset color you want to
apply to the border.
Select the size of border for the DVE
key on the selected key for the
selected ME.
Switcher >
Keyer > DVE
Param
DVE Key Border
1. Click the ME button for the ME
that you want to perform the
event on.
2. Click the Keyer button for the
key you want to perform the
event on.
3. Click the Parameter button and
select Border.
4. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
5. Enter a size for the border in the
Value (%) field.
Select the amount of cropping on the
bottom edge of the DVE key on the
selected key for the selected ME.
Switcher >
Keyer > DVE
Param
DVE Key Crop
(Bottom Edge)
1. Click the ME button for the ME
that you want to perform the
event on.
2. Click the Keyer button for the
key you want to perform the
event on.
3. Click the Parameter button and
select Bottom Edge.
4. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
5. Enter the amount of cropping in
the Value (%) field.
Select the amount of cropping on both
horizontal or vertical edges of the DVE
Switcher >
Keyer > DVE
Crop Param
DVE Key Crop
(Dual Edge)
key of the selected key for the selected
area.
1. Click the ME button and select
the area that you want to
perform the event on.
DescriptionLocationEvent
2. Click the Keyer button for the
key you want to perform the
event on.
3. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
4. Click the Parameter button and
select the edges you want to
crop.
5. Enter the amount of Left or Top
cropping you want to apply in the
Value % field.
6. Enter the amount of Right or
Bottom cropping you want to
apply in the Other Value % field.
Select the amount of cropping on the
left edge of the DVE key on the
selected key for the selected ME.
Switcher >
Keyer > DVE
Param
DVE Key Crop (Left
Edge)
1. Click the ME button for the ME
that you want to perform the
event on.
2. Click the Keyer button for the
key you want to perform the
event on.
3. Click the Parameter button and
select Left Edge.
4. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
5. Enter the amount of cropping in
the Value (%) field.
Select the amount of cropping on the
right edge of the DVE key on the
selected key for the selected ME.
Switcher >
Keyer > DVE
Param
DVE Key Crop
(Right Edge)
1. Click the ME button for the ME
that you want to perform the
event on.
2. Click the Keyer button for the
key you want to perform the
event on.
3. Click the Parameter button and
select Right Edge.
4. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
5. Enter the amount of cropping in
the Value (%) field.
Select the amount of cropping on the
top edge of the DVE key on the
selected key for the selected ME.
Switcher >
Keyer > DVE
Param
DVE Key Crop (Top
Edge)
1. Click the ME button for the ME
that you want to perform the
event on.
2. Click the Keyer button for the
key you want to perform the
event on.
3. Click the Parameter button and
select Top Edge.
64 • Custom Controls — Carbonite Operation Manual (v13.0)