Ross Carbonite Series - Custom Controls; Custom Control Events

DescriptionLocationEvent
4. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
5. Enter the amount of cropping in
the Value (%) field.
Select the amount of softness to apply
to the edge of the DVE key on the
selected key for the selected ME.
Switcher >
Keyer > DVE
Param
DVE Key Edge
Softness
1. Click the ME button for the ME
that you want to perform the
event on.
2. Click the Keyer button for the
key you want to perform the
event on.
3. Click the Parameter button and
select Softness.
4. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
5. Enter an amount of softness for
the DVE key or border in the
Value (%) field.
Select the size of the DVE key on the
selected key for the selected ME.
Switcher >
Keyer > DVE
Param
DVE Key Size
1. Click the ME button for the ME
that you want to perform the
event on.
2. Click the Keyer button for the
key you want to perform the
event on.
3. Click the Parameter button and
select Size.
4. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
5. Enter a new size in the Value
(%) field.
Select the x-axis position of the DVE
key on the selected key for the
selected ME.
Switcher >
Keyer > DVE
Param
DVE Key
X-Position
1. Click the ME button for the ME
that you want to perform the
event on.
2. Click the Keyer button for the
key you want to perform the
event on.
3. Click the Parameter button and
select X-Pos.
4. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
5. Enter a new position in the
Value (%) field.
DescriptionLocationEvent
Select the y-axis position for the DVE
key on the selected key for the
selected ME.
Switcher >
Keyer > DVE
Param
DVE Key
Y-Position
1. Click the ME button for the ME
that you want to perform the
event on.
2. Click the Keyer button for the
key you want to perform the
event on.
3. Click the Parameter button and
select Y-Pos.
4. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
5. Enter a new position in the
Value (%) field.
Reset the parameters or direction and
flip-flop for the DVE wipe transition of
the selected ME.
Switcher >
Transition >
DVE Wipe
Reset
DVE Wipe, Reset
1. Click the ME button for the ME
that you want to perform the
event on.
2. Click Reset to reset the DVE
wipe parameters.
Select whether the DVE wipe reverses
direction for every second transition of
the selected ME.
Switcher >
Transition >
DVE Wipe
Direction
DVE Wipe Direction
(Flip-Flop)
1. Click the ME button for the ME
that you want to perform the
event on.
2. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
3. Click Flip-Flip.
4. Click On or Off to select whether
Flip-Flop is on (On) or not (Off).
Select the direction for the DVE wipe
transition of the selected ME.
Switcher >
Transition >
DVE Wipe
Direction
DVE Wipe Direction
1. Click the ME button for the ME
that you want to perform the
event on.
2. Click the Change Type button
and select whether you want to
set (Absolute) or reset (Reset)
the parameter. Some selections
will not be available when you
reset the parameter.
3. Click Direction.
4. Click Forward or Reverse to
select whether the DVE wipe
moves in a forward (Forward)
or reverse (Reverse) direction.
Select the pattern you want to use for
a DVE wipe transition of the selected
ME.
Switcher >
Transition >
DVE Wipe
Effect
DVE Wipe Pattern
1. Click the ME button for the ME
that you want to perform the
event on.
Carbonite Operation Manual (v13.0) — Custom Controls • 65